このアプリのYoutube動画がある場合はURLを送信してください。詳細 »
APPLICATION INFO - iPhoneアプリの詳細情報
With this app you define psychrometric processes for different ambient air conditions and simulate them using climate data. While simulating, it calculates the capacities required to perform these processes. The reporting, both on screen and as pdf file, shows details about every psychrometric point in the processes, about all actions and processes and climate data.
To define a psychrometric process, you use actions between two or more psychrometric points, depending on the kind of action:
- Saturate: cool air from a given psychrometric point to a saturation point at 100% relative humidity. By entering a sensible heat factor, the app calculate the resulting saturation point.
- Condensate: cools the air along the saturation line and dries it through condensation.
- Heat: heats air using a given capacity, up to a given temperature or to a given psychrometric point. For the first two options, the app calculates the target point.
- Cool: cools air using either a given capacity and sensible heat factor (SHF) or up to a given psychrometric point.
- Humidify: humidifies air through steam or water evaporation, using a given humidification amount or up to a given psychrometric point.
- Mix air: adiabatic mixing of air from two sources resulting a mixed air condition.
- Heat exchange: heat or cool ambient air using the exhausted room air. You can choose between a total heat exchanger and a sensible one.
There are also two specific actions:
- Fixed or dynamic psychrometric points. A calculated point is dynamic, but also an ambient air point, as its value changes during a simulation
- Thermostat: a conditional action deciding whether to use a cooling, a heating or ventilation process. It uses temperature and humidity limits to change the process in use.
You can now combine these actions into processes, which in turn define a project. Then you define a climate. The app contains climate parameters for all capital cities of the world, but you can adapt them for any location. Climate data define ambient air conditions for each hour of 365 days, giving a total of 8760 climate conditions.
During a simulation run these conditions are applied to the processes and visualized on a psychrometric diagram. At the same time, the app calculates capacities required to heat, cool or humidify, so that you get an overview of the yearly capacities needed to run these processes. An elaborate reporting function shows the process data, the climate data and the simulation results both on screen and on pdf.
Features
- Choose one of the diagram types (Psychrometrics or Mollier) and select the lines to display.
- Select colors for the psychrometric diagram, the climate graphs and the report headers.
- Choose between metric or imperial unit dimensions, e.g. °C and °F or kW and BTU/h.
- Define parameters for heat exchangers.
- Use demo projects to start from and use them as a template for more complex projects.
- Tap the explain tab to get a short explanation of a calculation or a diagram.
- Zoom in (two fingers gesture) and pan (one finger gesture) to enlarge and move a part of the diagram.
- The app saves your latest settings and starts up with those settings. Adapts its user interface when you rotate your screen.
- Supports five languages (English, French, German, Spanish and Dutch), which you can set in the preferences.
- Supports light and dark themes.
To define a psychrometric process, you use actions between two or more psychrometric points, depending on the kind of action:
- Saturate: cool air from a given psychrometric point to a saturation point at 100% relative humidity. By entering a sensible heat factor, the app calculate the resulting saturation point.
- Condensate: cools the air along the saturation line and dries it through condensation.
- Heat: heats air using a given capacity, up to a given temperature or to a given psychrometric point. For the first two options, the app calculates the target point.
- Cool: cools air using either a given capacity and sensible heat factor (SHF) or up to a given psychrometric point.
- Humidify: humidifies air through steam or water evaporation, using a given humidification amount or up to a given psychrometric point.
- Mix air: adiabatic mixing of air from two sources resulting a mixed air condition.
- Heat exchange: heat or cool ambient air using the exhausted room air. You can choose between a total heat exchanger and a sensible one.
There are also two specific actions:
- Fixed or dynamic psychrometric points. A calculated point is dynamic, but also an ambient air point, as its value changes during a simulation
- Thermostat: a conditional action deciding whether to use a cooling, a heating or ventilation process. It uses temperature and humidity limits to change the process in use.
You can now combine these actions into processes, which in turn define a project. Then you define a climate. The app contains climate parameters for all capital cities of the world, but you can adapt them for any location. Climate data define ambient air conditions for each hour of 365 days, giving a total of 8760 climate conditions.
During a simulation run these conditions are applied to the processes and visualized on a psychrometric diagram. At the same time, the app calculates capacities required to heat, cool or humidify, so that you get an overview of the yearly capacities needed to run these processes. An elaborate reporting function shows the process data, the climate data and the simulation results both on screen and on pdf.
Features
- Choose one of the diagram types (Psychrometrics or Mollier) and select the lines to display.
- Select colors for the psychrometric diagram, the climate graphs and the report headers.
- Choose between metric or imperial unit dimensions, e.g. °C and °F or kW and BTU/h.
- Define parameters for heat exchangers.
- Use demo projects to start from and use them as a template for more complex projects.
- Tap the explain tab to get a short explanation of a calculation or a diagram.
- Zoom in (two fingers gesture) and pan (one finger gesture) to enlarge and move a part of the diagram.
- The app saves your latest settings and starts up with those settings. Adapts its user interface when you rotate your screen.
- Supports five languages (English, French, German, Spanish and Dutch), which you can set in the preferences.
- Supports light and dark themes.
このアプリはiPhone、iPadの両方に対応しています。
カテゴリー
ビジネス
ビジネス
リリース
2022/8/31
2022/8/31
バージョン
1.0
1.0
言語
サイズ
19.7 MB
19.7 MB
条件
スクリーンショット - iPhone | iPad
スクリーンショット - iPhone | iPad
MICRI Consult の他のアプリ » もっと見る
» 目的別iPhoneアプリ検索
- 辞書 » 日本語対応の辞書 » 英和辞典
- 学習 » 英単語 » 英会話 » クイズで楽しく
- スケジュール » 管理 » Googleカレンダー
Eight - 100万人が使う名刺アプリ
Sansan, Inc.無料Adobe Acrobat Reader: PDFの注釈付け..
Adobe Inc.無料netprint
FUJIFILM Business Innovation C..無料Indeed求人検索 - 正社員の転職・アルバイト・パートの..
Indeed Inc.無料ディクタフォン- 音声レコーダー
無料Polaris Office - ワード、エクセル、パワーポ..
Polaris Office Corp.無料転職なら リクナビNEXT
Recruit Co.,Ltd.無料為替情報 Lite
EJing無料PCM録音 - 高音質ボイスレコーダー
Kohei YASUI無料BusyBox
Claire Reynaud400 円
CatchApp新着アプリレビュー
様々な楽しみ方で運転士として成長していく鉄道運転士育成RPG「プラチナ・トレイン(プラトレ) 日本縦断てつどうの旅」
2016-05-17 00:00
日本語にはない英語発音のリスニングを楽しく学べる「発音どっち?英語リスニング 」
2014-12-20 12:00
指先の瞬発力が試されるカジュアルゲーム「早撃ちパニック」をリリース!
2014-12-08 15:21
新着アプリ動画